loader image


Replace the battery of my inthesk

When you have replaced the battery, you must close your inthesk.

It is best to remove the key ring and work on a flat surface. Replace the battery (positive side up) in the inthesk and align the pins at the top with the holes at the bottom.

Now gently push the top over the bottom.

If it doesn’t do it from the first try, don’t push too hard, as you might break some pins.

Check that all the pins are straight when you put them in place. If you need further help after trying this, please contact our technical support through our support.


Monday – Friday

07:00 AM – 15:00 PM